02 A-2A-F
Overview
The temperature at which a Thermal Cutoff changes its state of conductivity to open circuit detection curret.The tolerance according to IEC60691 is from +0 to-10℃.(With Japan Electrical Appliance and Material Law,on the other hand,they must function in the tolerance range of ±7℃.).
Details
| A-2A-F Series | ||||||||||||||
| Model No. | Rated functioning temp.(Tf) | Fusing-off temperature | Holding temperature(Th) | Maximum temp. limit(Tm) | Rated current (Ir) |
Rated voltage (Ur) |
Safety approval | RoHS Compliace | ||||||
| UL | CUL | VDE | TUV | PSE | CCC | EK | ||||||||
| A1-F | 102℃ | 98±2℃ | 79℃ | 203℃ | 2A | 250V | ● | ● | ● | ● | ● | ● | ● | ● |
| A2-F | 115℃ | 112±3℃ | 92℃ | 203℃ | 2A | 250V | ● | ● | ● | ● | ● | ● | ● | ● |
| A3-F | 125℃ | 120±3℃ | 101℃ | 203℃ | 2A | 250V | ● | ● | ● | ● | ● | ● | ● | ● |
| A4-F | 130℃ | 126±2℃ | 107℃ | 203℃ | 2A | 250V | ● | ● | ● | ● | ● | ● | ● | ● |
| A5-F | 135℃ | 131±3℃ | 112℃ | 203℃ | 2A | 250V | ● | ● | ● | ● | ● | ● | ● | ● |
| A7-F | 138℃ | 135±2℃ | 115℃ | 203℃ | 2A | 250V | ● | ● | ● | ● | ● | ● | ● | ● |
| A8-F | 150℃ | 145±3℃ | 126℃ | 203℃ | 2A | 250V | ● | ● | ● | ● | ● | ● | ● | ● |
| Rated functioning temperature(Tf)： |
The temperature at which a Thermal Cutoff changes its state of conductivity to open circuit detection curret.The tolerance according to IEC60691 is from +0 to-10℃.(With Japan Electrical Appliance and Material Law,on the other hand,they must function in the tolerance range of ±7℃.).
|
| Fusing(cut)-off temperature： |
The fusing-off temperature indicates value measured in silicon oil with a temperature increased by 0.5-1℃ per minute and a detective current 100mA or less.
|
| Holding temperature(Th)： |
The maximum temperature at which a thermal Cutoff will not cause a change in state of conductivity to open circuit while conducting rated current for 168 hours. This rating is required by safety standards based on IEC60691.
|
| Maximum temperature limit(Tm)： |
The maximum temperature at which a Thermal Cutoff can be maimtained for 10 minutes without reclosing.This rating is requirde by safety standards based on IEC60691.
|
| Rated current(Ir)： | The allowable maximum current which a Thermal Cutoff is able to carry. |
| Rated current(Ur)： | The allowable maximum voltage which a Thermal Cutoff is able to be applied. |