Overview
(1) CONTACT TYPE : There are 2 type.
Normally Close : Contact Opens When Temperature
Rises To Set Point.
Normally Open : Contact Closes When Temperature
Rises To Set Point.
(2) CAP TYPE : C Cap
(3) TERMINAL TYPE: U type in Copper material
Details
Reset Type
|
Automatic or Manual
|
Contact Type on Rise
|
NC
|
Electrical Rating
|
16A/250VAC
15A/125VAC
10A/250VAC
|
Calibration Method
|
1°C/min, Air circulation furnace
|
Operating Temp. *
|
40°C~ 150°C (ENEC)
40°C~ 150°C (UL/CUL)
|
Differential
|
10K ~ 65K
|
Temp. Tolerance
|
±3K/ ±5K
|
Heat Durability
|
180°C * 2Hr Max.
|
Circuit Resistance
|
50 MΩ Max.
|
Insulation Resistance
|
100MΩ at DC 500V
|
Dielectric Strength
|
AC 1000V/min or AC 1800/sec (Leak Current 0.5mA)
|
Operating Life
|
100,000 Cycles (15A/125VAC, 10A/ 250VAC)
10,000 Cycles (16A/250VAC)
|
* Action temp. and reset temp. can be set up depend on customer’s request
Honest-Well Bimetal thermal switch T24 Series –
We can customize this bimetal thermostat according to client’s needs. This snap action temperature switch in three single-pole, single-throw (SPST) switch actions:
Automatic Reset – either open or close its contacts on temperature rise.
Manual Reset – Available with contacts that open on temperature rise. The contacts must be reset by pressing the button after the device cools down.
One shot – Available with contacts that open on temperature rise, and which never reclose unless the ambient temperature drops below -35°C.