Overview
(1) CONTACT TYPE : Contact Opens When Temperature Rises To Set Point (Normally Closed)
(2) CAP TYPE : D Cap ( Stainless Steel )
(3) TERMINAL ORIENTATION : Vertical
(4) TERMINAL SIZE: Amp#250 TAB ( 6.35mm x 0.8t mm )
(5) Spot With E Type Bracket
Details
Reset Type | Automatic or Manual |
Contact Type on Rise | NC |
Electrical Rating | 16A/250VAC ; 15A/125VAC ; 10A/250VAC |
Calibration Method | 1°C/min, Air circulation furnace |
Operating Temp. | 40°C~ 200°C (ENEC)
40°C~ 205°C (UL/CUL) |
Differential | 10K ~ 65K |
Temp. Tolerance | ±3K/ ±5K |
Heat Durability | 180°C * 2Hr Max. |
Circuit Resistance | 50 MΩ Max. |
Insulation Resistance | 100MΩ at DC 500V |
Dielectric Strength | AC 1000V/min or AC 1800/sec (Leak Current 0.5mA) |
Operating Life | 100,000 Cycles (15A/125VAC, 10A/ 250VAC)
10,000 Cycles (16A/250VAC) |
* Action temp. and reset temp. can be set up depend on customer’s request
Honest-Well Bimetal thermal switch T24 Series –
We can customize this bimetal thermostat according to client’s needs. This snap action temperature switch in three single-pole, single-throw (SPST) switch actions:
Automatic Reset – either open or close its contacts on temperature rise.
Manual Reset – Available with contacts that open on temperature rise. The contacts must be reset by pressing the button after the device cools down.
One shot – Available with contacts that open on temperature rise, and which never reclose unless the ambient temperature drops below -35°C.
For clients who wish to have action temperature above 180°C, we’d recommend our ceramic thermostat H2 series.